Bath Resurfacing Company

We provide a professional and efficient service for both commercial and private clients.

We can give your bath a renewed lease of life. Call us on Freephone 0808 1081310.

Care For Your Bath

Please allow 48 hours before removing paper, replacing sealant and using your bath. If your shower screen has been removed, allow 7 days before replacing. Note that certain manufactured characteristics in the original bath surface such as a degree of surface contour and minuscule black specks (pinholes) may still be evident in some baths. These are in the original cast and no way detrimental to the use or the service life of your resurfaced bath.

It is possible that a gritty feeling may be present during the first few uses of your bath. This is due to air born dust particles settling on the surface during the final curing process. Do not attempt to pick at any dust particles as they will dissipate with use.

In order to prolong the life of your resurfaced bath, Bath Resurfacing Company recommend that you follow these simple instructions.

  • Use a non abrasive liquid cleaner paying particular attention to the manufacturers instructions
  • Should your bath be damaged either chipped, scratched or grazed, notify Bath Resurfacing Company immediately. In most cases, we are able to perform a local repair preventing the damage from spreading. The longer you wait, the higher the cost could be.
  • If your taps or shower drip, have them repaired as soon as possible as prolonged dripping will cause staining and will eventually ruin the surface.
  • Where applicable, ensure taps, over-flow, shower screens are fitted correctly and not loose or rubbing on the bath surface.
  • Do not use strongly coloured bath additives or hair dye as these may stain the surface, always follow manufacturers instructions. In hard water areas, thoroughly dry the bath after use to avoid lime scale build up.
  • If you have excessively hot water i.e. above 60°c, run approximately six inches of cold water before adding the hot water.
  • Refrain from using metal/hard plastic objects such as toys, soap trays, heavy solid plugs etc.
  • Do not use suction cup products, i.e. non-slip mats or sink plunger. Where necessary Bath Resurfacing Company recommends the use of self-adhesive non-slip pads.
  • Do not bath pets.

GUARANTEE, TERMS & CONDITIONS

If any damage arises as our result of our work, which does not comply with any of the above instructions, then Bath Resurfacing Company shall not be held liable under this guarantee or otherwise for any damage or failure thereafter.

Our terms are payment on completion, we accept either cash or cheque.

While every utmost care is taken during the resurfacing process to protect your property, Bath Resurfacing Company cannot be held liable for any loss or damage to your property.